Vimeo Twitter Youtube Facebook
Water Jet Machine

Water Jet Cutting Machine Operating Principles


Low pressure tap water, after passing through the purification and softening systems comes to the high pressure pump and with the aid of the hydraulic system it becomes high pressure following the compression process.
Such high pressure water is transferred from the high pressure pumps to the cutting head connected to axis Z on the CNC counter, via high pressure pipelines.

Abrasive pumped from the abrasive tank with the aid of 2 bar air comes to the sand timer, the flow rate per minute can be regulated with the potentiometer on the CNC. Sand coming from the abrasive tank meets the high pressure water in the mixing chamber at the cutting head and as the mixture squirts from the nozzle, the cutting process occurs.

Any material with a thickness of 0,1 mm up to 200 mm can be finely cut by means of this cold cutting method without causing any burrs, burn or deformation in the molecular structure. The material can be treated as a finished product and be mounted right after the fineblanking process, especially without any need for an extra machining operation.

Mavijet high pressure pump provides high cutting speed and quality with its performance generating “4000 barsconstantly”.It is easy to use, since the pressure amount can be adjusted according to the softness, hardness, thickness and other features of the materials within the range of 1000 - 4000 bars. The adjustment can be done electronically by typing the required amount on the touchscreen of the high pressure pump, in compliance with the qualities of the material.
The fact that Mavijet CNC counter avoids vibration on account of its resisting 11 – ton – construction, is the main factor behind itshigh cutting speed and precision. Its rigidity enables cutting with a 0,01mm sensitivity.

Mavijet’s target is to become a world brandwith its powerful high pressurepumps and increase our high pressure pump sales by sharing our vision, customer service policies, spare part stocks, service speed and knowledge with CNC manufacturers.




High Pressure Pump

MJT – P4000 – 37KW_4000 BAR PUMP

Provides rapid and smooth cutting with its constant cutting pressure of 4000 bars and digitally adjusted flow rate of 120lt/min.


Bridge Type CNC Counter

Bridge Type CNC Counter

Mavijet water jet cutting counter, which enables cutting in 3 axis, can be manufactured in the length range of 1000mm-6000mm and in the width range of 1000mm – 3000mm.


Sand Tank

Sand Tank

Operating pressure is 2 bars. It can be regulated with a potentiometer from the CNC unit.


Cutting Head

Cutting Head

The cutting head is generally being mounted on the robotic arm. The cutting technology of three dimentional water jet is being used for the improvement of industrial robots and robotics. It provides maximum flexibility in any environmental condition.


Sand Timer

Sand Timer

The sand timer is located on the robotic arm.

We manufacture triaxial or five-axis robotic systems which can give shape to various types of materials which differ from each other, without causing a deformation on the cutting surface and actualize very complicated designs we have created, taking into account the sectoral requirements.

Mavijet high pressure pump, having been tested at a pressure of 5500 bars, is fixed to the level of 4000 bars.

The cutting speed and surface qualities of the materials cut by Mavijet have won recognition from everyone, whether concerned with water jet technologies or not.

Address

Alaaddinbey Mah. İzmiryolu Cad. No:305/J Nilüfer / BURSA
Phone:+90 224 482 40 21
Fax: +90 224 482 40 22
mustafaozkan@maviformmetal.com.tr